Deploy Device Protection with JumpCloud

Use JumpCloud to deploy Aikido Device Protection across your managed macOS fleet with the required permissions in place.

All devices must be enrolled in JumpCloud Apple MDM before you begin.

Installation

1

What you'll need

Before starting, make sure you have the following from the Aikido Device Protection dashboard:

• The Aikido Device Protection .mobileconfig (downloaded from the Aikido Device Protection dashboard)
• The Aikido Device Protection installer (.pkg file, downloaded from the dashboard)

If you're missing any of these, go back to the Aikido Device Protection dashboard, click Connect Device, and complete the pre-flight steps.

2

Add the Aikido Device Protection configuration profile

1. In the JumpCloud Admin Portal, go to Device Management → Policy Management.
2. Click (+), select the Mac tab, and choose MDM Custom Configuration Profile. Click configure.
3. Give the policy a name (e.g. "Aikido Device Protection").
4. Under Settings, click upload file and select the .mobileconfig file.
5. Select the Device Groups tab and assign the policy to the target device group.
6. Click save.

This profile allows the Aikido Device Protection system extension to load silently, enables the network content filter, and stops users from disabling background services in System Settings → Login Items.

3

Upload the Aikido Device Protection installer

1. In the JumpCloud Admin Portal, go to Device Management → Software Management → Apple.
2. Click (+Add New) and select JumpCloud Private Repo.
3. Enter an Application Name (e.g. "Aikido Device Protection").
4. Under Upload File, upload the Aikido Device Protection .pkg file and click Upload.
5. Once processing completes, select the Device Groups tab and assign the app to the same device group.
6. Click save, then confirm the install.

4

Deploy in the right order

Deploy the configuration profile before the installer for a smoother rollout.

1. Assign and save the Aikido Device Protection configuration policy.
2. Verify it is installed on a test device (JumpCloud doesn't guarantee delivery order within a device group).
3. Deploy the Aikido Device Protection app.

5

Reboot devices after installation

1. In the JumpCloud Admin Portal, go to Device Management → Commands.
2. Click + Command, select MDM Command, and choose Restart Device.
3. Assign it to the same device group and click Run Now.

The agent fully activates on the next boot.

6

Verify the deployment

On a test device, confirm:

1. The system extension is activated:

   systemextensionsctl list | grep aikido

   Expect to see the extension marked [activated enabled].
2. Open System Settings → General → Login Items & Extensions and confirm the Aikido Device Protection entries cannot be toggled off.

Troubleshooting

Problem	Fix
Users still see the popup	Make sure the configuration profile is scoped correctly and installed before the package policy runs
Extension is waiting for user approval	Check the System Extensions payload and confirm the team ID and bundle ID match exactly
The package installs but the device does not connect	Confirm the token script ran before the package install and that the token was copied correctly
Duplicate extension entries appear	Reboot the device
The content filter is not approved silently	Re-upload the .mobileconfig profile and verify it is installed on the device